The Tool Crib

The following tools are available for chapter members to check out for their personal use on their aircraft.  Please contact the Hangar Manager, a Tech Counselor, or the President to coordinate.  Tools are expected to be returned in the same condition as when checked out (excluding "normal" wear and tear).   

Click here to download and print the tool check out form.  Fill it out before or when you check out the tool(s).

Available Tool List

• Three 1100 pound capacity transducer scales with ramps for weighing aircraft (arrange use through technical counselor: for your personally owned aircraft only)
• Borescope
• Graco HVLP Air Turbine Paint System
• Electronic Digital Protractor and Level (perfect for setting wing incidence angle)
• Instrument hole Punch  (3 1/8" & 2 1/4")
• Instrument hole layout jig
• Camlok receptacle installation jigs
• Camlok snap ring pliers
• #30 and #40 hole finders
• Firesleeve clamp installation tool
• Rivet shaver and various bits
• Back rivet plate
• Countersink Cutter  w/ various pilot bits
• Hex crimp tool for antenna coax cable
• Crimp tool for machine pins
• Bendix  Mag Check Tools
• Engine Hoist
• Differential compression tester
• Spark plug cleaner
• Sheet Metal Brake
• Sheet Metal Shear

Members tools - Available to loan with checkout

• Hydraulic Pull Tester 0-1000 lbs to test prop - Jerry Medlock
• Glass Bead Blaster - Al Cleveland
• Rivet Squeezer - Bob Brown
• 3X Rivet Gun - Bob Brown